Water Protection - WaterBug
Water Monitor with relay output

WaterBug 200
Water Monitor with relay output

Model ID: WB200


NOW Just $65.00 USD
Image Viewer

The model WB-200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, Auto Dialers, etc.

The unit can monitor up to as many as six sensors up to hundreds of feet away, depending on the wire used. Each sensor has surface contacts that detect the first appearance of water forming a film on the floor. The sensor will not alarm due to condensation or high humidity. One standard surface sensor with 12' of wire is included with the unit.

Features:

Typical Applications:

Accessory Options


SPECIFICATION

VALUE FOR WB-200

Console Size

5" x 2.44" x 1.25" (12.7 cm x 6.2 cm x 3.18 cm)

Probe Size (standard P/N #1040)

2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm)

Probe Size (under carpet P/N #1041)

2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm)

Power Requirements (resting state)

12V or 24V AC or DC

Power Requirements (alarm condition)

5mA @ 12V or 24V AC, or 13.5mA @ 12V or 24V DC

Sensitivity

Will not alarm due to high humidity or condensation

Operating Temperature

Control and Probe 32 degrees to +140 degrees F (0 degrees to +60 degrees C)

Outputs

Form C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct high voltage switching)

Recommended Dist. Between Probes & Console

1-2 probes: 200ft (61 m) max.  3 or more probes: 500ft (30.5 m) per probe

Recommended Max. Probes Per Console

6